Add to Registry
Please choose the registry you want to add this product to:
Monster Lite Short Plate Storage Post Pair is rated
out of
5 by
10.
Rated 4 out of
5
by
benps from
Nice Addition to Rack
Solid as all Rogue ML accessories are. Paper instructions that came with the product clearly picture the lock washer and nut on the storage post side so that they face any plates that are put on the post. But I felt that the bolt tip and nut was more likely to mar my bumper plates than the head of the hex bolt so I reversed it. From experience, I know that the lock washer can strip the powder coating when removed, so I decided to replace it with a flat washer and lock nut from the hardware store in case I decide to change where I mount the storage post. The other thing I did was coat the hex bolt head using "Plasti Dip" Spray. Pictures posted. This leaves a rubber like coating which I think will reduce the chance of marring the bumper plates. I put a 45 on the post and spun it. No marks on the bumper when making contact with the bolt head. The coating is thin though, so we'll see how it stands up to repeated racking of plates on the storage post.
Date published: 2018-02-12
Rated 4 out of
5
by
Farmer Phil from
Small Issue
First, the post has been installed incorrectly in one of your pictures, the nut and lock washer are to be installed on the post side.
With the post installed correctly, there is indeed 5" of usable space, but this could be redesigned to give almost another inch if a flush mount was used.
Date published: 2017-06-30
Rated 5 out of
5
by
Steel Biker from
Can be used for neutral pullups
I installed two of these on a 43" cross member in place of my pull up bar in order to do neutral grips. I have them mounted horizontally but they seem to be plenty strong.
I find the neutral pull up position a lot more comfortable than the standard pull up position and it works my forearms better-kind of like hammer curls. The slightly thicker grip is actually just fine.
Date published: 2020-03-15
Rated 5 out of
5
by
Ovie from
Excellent feature
I purchased these for two reasons. Two get my plates off the floor and add stability for swinging motions on the rack. I have an SML-2 squat rack with single pull-up bar and safety spotter arms. These add good storage and stability. In a compact space in my garage.
Date published: 2018-05-08
Rated 5 out of
5
by
SantaCruzMac from
Great plate storage
Definitely sturdy as all Rogue products are. I can easily store multiple plates on the post. I opted to run the lock washer and nut on the inside of my RML-3W uprights to provide more room to store plates on the storage post. No more plates on the floor and changing out plates is convenient.
Date published: 2018-06-16
Rated 5 out of
5
by
MrMoe430 from
Excellent
Holds plates; as it should. Wish I'd ordered the longer post pair as I was concerned with space. Solid product l.
Date published: 2018-01-01
Rated 4 out of
5
by
Dixie Normus from
Convenient storage
Well built. Will hold at least 3-4 plates. Powder coat scuffs easily.
Date published: 2019-06-03
Rated 2 out of
5
by
Ricky T from
Overall Fair but inefficient.
I installed it on my wall mount and just not made for it as far as efficiency. The weights hung on the rack get in the way when using the rack for bench pressing. Other than that there meee do to the huge as bolts sticking out.
Date published: 2020-07-09
© 2010-2020 Rogue Fitness. All Rights Reserved.