SHIPPING DELAY: 5-10 BUSINESS DAYS.
Online orders and operations are active. Retail store is closed. | Covid-19 Status

Monster Lite/Infinity Single Bar Holder

★★★★★
★★★★★
4.2
33 Reviews
Made in U.S.A.

Monster Lite/Infinity Single Bar Holder

★★★★★
★★★★★
4.2
33 Reviews
Made in U.S.A.
A$93.00
Ships in 6-8 weeks
Recommended for Squat Stands & Flat Foot Racks

Options*

Vertical
Horizontal

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Length5.25"
Width3"
Height10"
Steel Notes2" Inside diameter steel tube.
Other Product SpecsHoles in mounting plate at 4" on center. Mounting hardware included.
Infinity CompatibleYes
Monster Lite CompatibleYes
Product Description
Gear Specs
Shipping
Product Description

A convenient, easy-to-mount accessory that allows you to store a barbell directly on the exterior of an existing Rogue rack, rig, or squat stand. The Single Bar Holder is compatible with both our Infinity and Monster Lite Series, with 5/8” hardware and mounting plate holes 4” on center. Once installed, almost any standard Olympic barbell can be placed sleeve-first into the Bar Holder’s 7” tall steel tube, creating a secure storage solution that won’t damage the bar’s knurling.

Read More

**WARNING: The Rogue Single Bar Holder should NEVER be mounted below a pull-up bar, and ALWAYS on the exterior of a Rack/Rig/Squat Stand. Failure to follow these guidelines may result in severe injury.

Single Bar Holder

A convenient, easy-to-mount accessory that allows you to store a barbell directly on the exterior of an existing Rogue rack, rig, or squat stand. The Single Bar Holder is compatible with both our Infinity and Monster Lite Series, with 5/8” hardware and mounting plate holes 4” on center. Once installed, almost any standard Olympic barbell can be placed sleeve-first into the Bar Holder’s 7” tall steel tube, creating a secure storage solution that won’t damage the bar’s knurling.

Please Note: Horizontal Mount Bar Holder is NOT compatible with S-Series Squat Stands, or Flat Foot Racks. Instead the Vertical Mount is recommended for use with these products.

The Rogue Single Bar Holder should be mounted only on the exterior of a rig/rack/stand. As always, Rogue recommends keeping the area directly under pull-up bars clear of attachments at all times.

Important: This barbell holder is compatible only with Infinity and Monster Lite Rigs, Racks & Stands.

Gear Specs

SPECIFICATIONS

  • Made in the USA
  • Dimensions:   x   x  
  • Steel Tube: 7” height, 2” inside diameter
  • Applications: Vertical Barbell Storage for Home Gym, Weight Room, or Training Center
  • 5/8” bolts and fasteners
  • Holes in Mounting Plates 4” on Center
  • Mounting Hardware Included
Shipping

ROGUE FAST SHIPPING

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your day.  Order today, track today.

Recommended Products

Reviews

1 - 8 of 33 Reviews
JustinMcC
Oklahoma City, OK
★★★★★
★★★★★
4 months ago
Great attachment
Great attachment for my home gym Monster Lite stand. Allows me to store my curl bar out of the way.
Yes, I recommend this product
Originally posted on roguefitness.com
football52
Houston, Texas
★★★★★
★★★★★
5 months ago
Just what I was looking for
I have two of them attached to my vertical plate tree, and just as expected from rogue, its sturdy and its a hard to beat type of quality. People complain about them scratching up the sleeve. I have the cerakote Ohio bar and Bella bar, it does scratch it but its not a huge deal for me. They're scratched up anyways from plates coming on and off of them. 10/10
Yes, I recommend this product
Originally posted on roguefitness.com
OptimumPT
Swarthmore, PA
★★★★★
★★★★★
6 months ago
works as it should
perfect fit and holds the bar without being clunky or in the way.
Yes, I recommend this product
Originally posted on roguefitness.com
Jackterrier
Irvine CA
★★★★★
★★★★★
6 months ago
Great product
Serves its purpose perfectly strong and keeps my barbell neatly in place out of the way
Yes, I recommend this product
Originally posted on roguefitness.com
Jcha007
California
★★★★★
★★★★★
7 months ago
Does it’s job perfect
Great little add on. Smooth bevel. Hold barbell perfectly with out worrying about damaging the sleeves.
Yes, I recommend this product
Originally posted on roguefitness.com
Rogue Fanboi
San Francisco
★★★★★
★★★★★
8 months ago
Vertical Holder Needs Longer Mounting Bracket
It does what it's supposed to do. Only complaint with the vertically mounted bar holder is that I'm unable to mount it to the lowest holes on my RML-3 rack because the upper hole of the bar holder's mounting bracket intersects with the lower horizontal members on the rack which are welded in place and won't allow me to pull a bolt through. It would be nice to have it at the lowest position on the rack because my garage gym ceiling is relatively low and I really need to be careful not to hit the bar with it when storing it.
Yes, I recommend this product
Originally posted on roguefitness.com
Chooey
South Bay, CA
★★★★★
★★★★★
1 year ago
Vertical Holder - Gets the job done
I have an SML-1 rack and preferred a vertical stand than a horizontal one for space purposes. When you install it at the bottom, screwing in the holder is a bit hard because there's little space there, but it's really not a problem. As others have stated, there is nothing at the bottom within the holder, so your bar rubs along the inner metal tube when you place it in. I personally don't care much about the very little cosmetic damage it has caused (although I really don't see none on my bar) because I slowly wiggle my bar to the bottom while holding it. I'm sure you can scratch up your bar if you just let it go and let gravity take its course, which explains other people's comments... Anyway, works like a charm!
Yes, I recommend this product
Originally posted on roguefitness.com
jforb923
Charlotte, NC
★★★★★
★★★★★
1 year ago
Mounted to the Olympic Plate Tree
I bought this to Mount to my Olympic Plate Tree 2.0, and it mounts perfectly. Great storage for my extra barbell. Only reason that this is not a 5 star review is due to the lack of protection inside the holder. The bare steel can absolutely scratch up sleeves and could do so well with some UHMW. I lined mine with UHMW tape, which works well, just was time consuming.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery