Daily Shipping Deals

Free Shipping on Select Items See Details

Buy 3 or More 3 Ships Free Items and They Ship For Free See Details

Rogue RML-3W Fold Back Wall Mount Rack

Rogue RML-3W Fold Back Wall Mount Rack
AU$860.00

Gear Specs

Brand Rogue Fitness
Rack Depth No
Product Weight 163lbs or 190lbs
Length From Wall - 24.75" or 43.75"
Width 56 3/16" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height 90 3/8"
Foot Print 24.75" or 43.75" x 56 3/16" (On Wall)
Steel Notes 3x3" 11 gauge steel
Other Product Specs Inside depth - 21.5" or 41.5"
Stringer Not Included
Made In USA Yes

ROGUE RML-3W FOLD BACK WALL MOUNT RACK

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

A Rogue original Fold Back Rack is built with two 3X3” 11-gauge American steel uprights, laser cut in Columbus, Ohio, with Westside hole spacing through the bench/pull area, and 2”-on-center spacing above and below. All steel is powder coated in the Rogue factory for a durable finish.

Optional Fold Back Rack Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

Additional Specifications:

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 3x3” 11-gauge steel, 90” height
  • Inside Depth: Choice of 21.5” or 41.5”
  • (1) Set of Monster Lite J-Cups
  • (4) Mounting Brackets
  • (4) 5/8” x 5” Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 5/8” x 4” Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10-1/8" tall, 13/16" extension off the mounting surface

See More: Rogue Power Racks

Gear Specs

Brand Rogue Fitness
Rack Depth No
Product Weight 163lbs or 190lbs
Length From Wall - 24.75" or 43.75"
Width 56 3/16" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height 90 3/8"
Foot Print 24.75" or 43.75" x 56 3/16" (On Wall)
Steel Notes 3x3" 11 gauge steel
Other Product Specs Inside depth - 21.5" or 41.5"
Stringer Not Included
Made In USA Yes
  • 1Heavy Gauge American Steel & Hardware

    The RML-3W uses heavy-duty 11 gauge 3x3" square laser cut steel uprights with 5/8" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The RML-3W rack is compatible with our exclusive ML accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

  • 2Choice of Depth

    The Fold Back Rack is available in two depths: 21.5” and 41.5”. In the 21.5” version, the sides of the rack will position flush against the wall whether you swing them inward (towards each other) or outward. With the 41.5” depth rack, the sides can still fold in or out, but if both are moved inward, there will be a slight overlap—so to open up max space, you'd want to fold either both sides outward or one inward and one outward. For most setups the 21.5" is the best choice. Choose 41.5" if you need more space in the rack for gymnastic movements.

  • 3Fit, Finish & Lifetime Warranty

    Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The RML-3W is guaranteed by Rogue for Life.

  • 4Space Efficiency

    The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5” of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

  • 5 Easy Installation + Optional Stringers

    Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2” on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (16-3/8" x 2-1/2" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

  • 6Rogue Shipping

    Rogue prides itself on fast, professional shipping, often with same-day turnaround times. Your bar will be packaged safely and ship fast. You can follow the progress of your order using the Rogue Shipping Tracker.

Stringer Installation

Rogue RML-3W Fold Back Wall Mount Rack is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from 1 thing. very pleased with my purchase, though there was one unfortunate thing. the holes where the silver and orange pins go that hold the arms in place when deployed or against the wall... not completely unobstructed. there was metal that hadn't been completely machined down and it made it impossible for the pins to go through, luckily i had a dremel that i used to grind it down a bit so the pin could go through smoothly. if i hadn't had a dremel this would be a much different review. but alls well that ends well, very pleased with it, and as always i love the quality.
Date published: 2017-11-09
Rated 5 out of 5 by from Very stable and solid. Molto robusto e ben fatto. Very tough and well built.
Date published: 2018-05-30
  • y_2018, m_8, d_12, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_AU-RF0611group, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rogueaustralia