Add to Registry
Please choose the registry you want to add this product to:
Rogue HD Concrete Anchors is rated
out of
5 by
4.
Rated 5 out of
5
by
Chepa from
The perfect stabilization for your squat rack
These worked perfectly. All I had to do is buy a 3/8" concrete drill bit (around $6) and pre-drill the holes. Unlike the video, I pre-drilled my holes directly thru the rubber mats. After that it was a matter of using a 9/16" socket to tighten them in. It doesn't get much easier than that. The result is a squat rack (or rig) that feels like it was built as part of the house. There is no movement at all. This one is a must if you are on the bigger size. I weigh 210# and the ML-490 would start moving during butterflies. Not any more...
Date published: 2014-09-16
Rated 5 out of
5
by
RThom from
They do the job
These do the job just fine. I do wan't to correct something in the description though. If you use wedge-style anchors, and you think you may want to move your rig/rack later, drill the hole deep enough and you can hammer the anchor down into the concrete when you move the rack. No need to grind those off.
Date published: 2016-06-10
Rated 4 out of
5
by
Saule from
Good quality. Huge mark up.
Simpson makes good stuff. I had to get creative to vacuum the dust out of the bottom of the 3” holes, but beyond that I had no trouble installing with an 18V hammer drill.
The 500 % Rogue markup is a little much, but I guess I paid for convenience. For that I dock a star.
Date published: 2018-04-11
Rated 5 out of
5
by
Scott67 from
An absolute must
I used these to install a rig and they are amazing. They're easy to install and the best part is that they're removable.
Date published: 2014-07-31
